Port Arthur LNG

Thanks to a warm start to the season and low Asian demand for LNG, Europe has so far been able to stave off a worst-case scenario for natural gas supply this winter. Still, the European market is keeping a keen eye on the years ahead, when the continent will need to rely on new sources of LNG to meet demand and refill inventories with little chance of any Russian gas. The call for more LNG has ushered in a new wave of export-project development, with two U.S. projects reaching a positive final investment decision (FID) this year and LNG offtakers in Europe and elsewhere committing to an incredible 37 MMtpa (4.9 Bcf/d) of long-term contracts from pre-FID sites in North America. This momentum has revived a number of projects from the COVID-induced wasteland, including Sempra’s Port Arthur LNG. In today’s RBN blog, we continue our series on U.S. LNG projects by taking a closer look at Port Arthur, the one most likely to take FID next.

The cascade of LNG export project news continues. In the past week, yet another “second-wave” U.S. LNG export project — NextDecade’s Rio Grande LNG — cleared FERC’s environmental review process. That follows news of three other projects that received their environmental approvals this month; plus two other projects — Tellurian’s Driftwood LNG and Sempra’s Port Arthur LNG — got final FERC authorization to construct their facilities, should they make the financial commitment to proceed; and, finally, plans for a brand new export terminal, Venture Global’s Delta LNG, were unveiled. All in all, there are more than 20 announced projects totaling 235 MMtpa (~35 Bcf/d) that are looking to catch the second wave of U.S. LNG exports in the next decade. The timing of their regulatory approvals and final investment decisions will determine, in part, when this next wave — or shall we say tsunami — of export demand will materialize. Today, we wrap up our second-wave LNG project update series with a look at the progress made by some of the remaining projects that we’re tracking.

2019 is slated to be a watershed year for U.S. LNG export projects vying to catch the second wave — the first wave being the slew of liquefaction trains already operational or in the process of being commissioned or constructed. As expected, regulatory and commercial activity has heated up around the two dozen or so longer-term proposals to add liquefaction capacity along the U.S. coastlines over the next decade. Last week, the Federal Energy Regulatory Commission (FERC) approved two of those projects — Tellurian’s Driftwood LNG and Sempra’s Port Arthur LNG — and several others, including Driftwood and NextDecade’s Rio Grande LNG, also have made progress on the commercial front. Many of these projects are targeting a final investment decision (FID) this year. Today, we continue a series highlighting the second-wave projects’ latest developments.

Developers are scrambling to advance the next round of liquefaction/LNG export projects, primarily along the U.S. Gulf Coast. Earlier this month, LNG marketing behemoth Total SA signed initial agreements with Sempra Energy that would support Sempra’s efforts to add more liquefaction capacity at its Cameron LNG project in southwestern Louisiana and to build a liquefaction plant at its Energía Costa Azul LNG import terminal in Mexico’s Baja California state. A few days later, Total, Mitsui & Co., and Tokyo Gas signed heads of agreements for the entire capacity of the Mexican liquefaction project, propelling that project to the fore. Sempra also continues to pursue a third project: Port Arthur LNG. Today, we continue our series on the next round of liquefaction/LNG export terminals “coming up” with a look at Phase 2 of Cameron LNG, as well as Energía Costa Azul and Port Arthur LNG.

A total of 13 U.S. liquefaction trains with a combined capacity of about 58 MTPA (~8 Bcf/d) are either in early stages of operation along the Gulf Coast or under construction and scheduled to be online by the end of 2019. Of that, about 3.2 Bcf/d is being developed along the Texas Gulf Coast. Beyond that, a “second wave” of liquefaction projects is lining up, with as much as an additional 11 Bcf/d of capacity proposed for Texas by the early 2020s. While many of these second-wave projects may not get built, those that do will require the construction or rejigging of hundreds of miles of pipelines, particularly along that Gulf Coast corridor. Several of the first and second wave liquefaction projects have proposed to build laterals that connect to and branch out from nearby long-haul pipelines, creating new Gulf Coast-bound delivery points for Eagle Ford shale gas as well for supply that will eventually move south from supply basins as far north as the Marcellus and Utica shales. Today, we take a closer look at these liquefaction-related pipeline projects and how they will connect to and impact the existing pipeline network.