The global economic shut-down caused by COVID continues to wreak havoc on U.S. markets. Last week, the dynamics that resulted in negative prices for NYMEX WTI thrust crude oil, and, more specifically, storage at Cushing, OK, into the national spotlight. The extraordinary imbalance in U.S. crude oil supply and demand has been pushing record volumes of oil into storage at the Cushing crude hub and tankage along the Gulf Coast. The same fundamental factors have also driven a surge in stocks of refined products like gasoline and diesel. Now the questions on everybody’s mind are, how long until storage tanks are completely full and what will that mean? Today, we’ll discuss recent trends and consider what record storage builds mean for the oil patch.
For the week ended April 24, the Energy Information Administration (EIA) reported a total U.S. storage build of 9 MMbbl. That followed a 15-MMbbl build the week ended April 17, and a 19-MMbbl build the week before that. Over the past five weeks, crude storage levels in the U.S. have increased by 72 MMbbl, or an average of 2.1 MMb/d. To put that in perspective, the previous high storage build, according to EIA statistics, which date back to 1982, was 14 MMbbl in a week, or 2 MMb/d. The numbers for Cushing, the nation’s largest commercial storage hub for crude, have been similarly alarming, with the volume of crude going to storage the past five weeks averaging 4.8 MMbbl per week, or 700 Mb/d. But of the last five weeks’ 72 MMbbl of storage build, Cushing only accounted for one-third of the total U.S. Over half entered storage in PADD 3 — the Gulf Coast region — which has seen crude inventories increase by an average of 7.8 MMbbl per week, or 1.1 MMb/d, for the last several weeks. And it’s not just crude; stocks of transportation fuels have also seen a sharp uptick recently.
Let’s start this discussion by considering the dynamics of why storage has seen such dramatic increases. The short answer is that supply and demand are out of whack — way out of whack. Assessing the U.S. supply-demand balance is relatively straightforward. Supply equals production plus imports. As shown in the left column in Figure 1, U.S. production (green bar segment) as of April 24 stood at 12.1 MMb/d and imports (blue segment) averaged 5.3 MMb/d, for total supply of 17.4 MMb/d. Demand, in turn, equals refinery consumption plus exports. On the demand side, exports of 3.3 MMb/d (purple segment) and refinery runs of 12.8 MMb/d (orange area) couldn’t balance the market, so the remaining 1.3 MMb/d was shoved into storage. Over seven days, that 1.3 MMb/d gives us a weekly storage build of 9 MMbbl. Using that logic, if we then do a linear extrapolation of the average build rate for the last five weeks (dashed red line in right graph), 14.5 MMb/week from the ending stock balance on April 24 of 528 MMbbl to the EIA estimate of total working storage capacity of 653 MMbbl, total U.S. storage would be filled by mid-June. (For weekly updates on the balance, check out our Crude Gusher.)
To access the remainder of How Much More Can I Take - How Long Until Crude Oil and Refined Products Storage Maxes Out? you must be logged as a RBN Backstage Pass™ subscriber.
Full access to the RBN Energy blog archive which includes any posting more than 5 days old is available only to RBN Backstage Pass™ subscribers. In addition to blog archive access, RBN Backstage Pass™ resources include Drill-Down Reports, Spotlight Reports, Spotcheck Indicators, Market Fundamentals Webcasts, Get-Togethers and more. If you have already purchased a subscription, be sure you are logged in For additional help or information, contact us at email@example.com or 888-613-8874.